A fully differential monolothic 2.4GHz PA for IEEE 802.15.4 based on efficiency design flow
Resumen:
This work presents the design and implementation of a differential class C power amplifier (PA) in a 90 nm CMOS technology, specified to be used in a IEEE802.15.4 low power transceiver. The design is based on a PA efficiency design flow implemented in MATLAB which enables to reach very good power efficiency figures. The method is validated comparing MATLAB predicted data and post-layout SpectreRF simulated results. Post-layout simulations show a Power Amplifier Efficiency (PAE) of 46.5,% a power gain G pow of 26dB, and an output power P out of 1.9dBm for a 100 load, working with a supply voltage V DD = 0.65 V and a MOS DC current I D of 4.6 mA. The total area is 700 μm × 710 μm
| 2010 | |
|
Layout Manganese Power amplifiers Monolithic integrated circuits |
|
| Inglés | |
| Universidad de la República | |
| COLIBRI | |
| https://hdl.handle.net/20.500.12008/46990 | |
| Acceso abierto | |
| Licencia Creative Commons Atribución - No Comercial - Sin Derivadas (CC - By-NC-ND 4.0) |
Resultados similares
-
A 2.4GHz LNA in a 90-nm CMOS technology designed with ACM model
Autor(es):: Fiorelli, Rafaella
Fecha de publicación:: (2008) -
MOST Moderate–weak-inversion region as the optimum design zone for CMOS 2.4-GHz CS-LNAs
Autor(es):: Fiorelli, Rafaella
Fecha de publicación:: (2014) -
RSIS : red de sensores inalámbricos basado en el Standard IEEE 802.15.4
Autor(es):: Moreira Pérez, Pedro
Fecha de publicación:: (2009) -
Operational amplifier power optimization for a given total (slewing plus linear) settling time
Autor(es):: Silveira, Fernando
Fecha de publicación:: (2002) -
Design and power optimization of CMOS RF Blocks operating in the moderate inversion region
Autor(es):: Barboni, Leonardo
Fecha de publicación:: (2005)